DOSE EXPOSURE WORK PLANNING USING DMU KINEMATICS TOOLS

  • Rosli Darmawan

Abstract

The study on the possibility of using DMU Kinematics module in CAE tools for dose exposure work planning was carried out. A case scenario was created using 3D CAD software and transferred to DMU Kinematics module in a CAE software. The work plan created using DMU Kinematics module was animated to simulate a real time scenario. Data on the phantom position against the radioactive source was collected by activating positioning sensors in the module. The data collected was used to calculate the estimated dose rate exposure for the phantom. The results can be used to plan the safest and optimum procedures in carrying out the radiation related task.

Published
2011-05-11
How to Cite
DARMAWAN, Rosli. DOSE EXPOSURE WORK PLANNING USING DMU KINEMATICS TOOLS. Jurnal Sains Nuklear Malaysia, [S.l.], v. 23, n. 2, p. 12-18, may 2011. ISSN 2232-0946. Available at: <https://jsnm.nuclearmalaysia.gov.my/index.php/jsnm/article/view/43>. Date accessed: 16 sep. 2021.